background image

17

eaSy fit • ShaRktooth

eaSy fit

Your helmets SHARK Nano and SHARK Raw 

have been designed to provide additional com-

fort for eyeglasses wearers with the SHARK 

EASY FIT.
The 2 cheeks can be removed to provide the 

passage to the glasses arms. These pockets 

may contain (or not) specific comfort foam. 

SHARK Nano and SHARK Raw are delivered 

without this foam to facilitate the insertion of 

the branches of glasses. If you do not wear 

glasses, and if you wish to have a stronger fit 

of the helmet at temples area, you can insert 

those foams (which are supplied in the pocket 

containing the manual of the helmet) into the 

pockets of EASY-FIT system. To mount or re-

move the foams, follow the operations explai-

ned in the pictures (pictures A-B-C).
Use or not use the EASY-FIT comfort foam do 

not influence on the protective performances 

of your helmet.
 

ShaRktooth

Your helmet SHARK Nano and SHARK Raw are 

designed to be equipped with audio system 

SHARKTOOTH. This very efficient communi-

cation system can be mounted in the SHARK 

Nano and SHARK Raw very easily, while 

maintaining the good safety performances of 

your helmet well within the limits of the valid 

standards.

WARNING : SHARK disclaims all liability in 

case of adaptation into the SHARK Nano or 

SHARK Raw of a communication system 

other than the SHARKTOOTH.

Summary of Contents for Nano





















Reviews: