background image

2

  Thank you for choosing a SHARK Nano/ SHARK Raw helmet. The SHARK Nano / SHARK Raw 

is a top-quality helmet that is ideal for use for urban and extra urban area.
The helmet complies with international standards but does not purport to guarantee total protec-

tion in all circumstances. 
Make sure you carefully read all of the following recommendations before using the helmet. Just 

because you are wearing a helmet does not mean you should neglect driving carefully.
Standard: This SHARK Nano/ SHARK Raw helmet has been approved and conforms to the ECE R 

22/05 standard. It therefore meets the requirements imposed on all the countries that recognise 

this standard in their territory.

Warning : for French traffic, the Highway Code requires safety reflectors (supplied 

separately in a packet) to be fitted in accordance with the enclosed plan. In the United 

States and Canada, specific regulations require that helmets that only have ECE approval 

cannot be used in these territories unless they have acquired additional DOT FMVSS 218 

approval.

You can find this user manual on our web site  

www.shark-helmets.com

Summary of Contents for Nano





















Reviews: