8
TOLL FREE:
1-800-798-7398
9
www.sharkclean.com
English
IMPORTANT:
Always make
sure the fabric steamer is
UNPLUGGED from the electrical
outlet when not in use. Never
fill the water reservoir when the
unit is plugged in.
IMPORTANT:
Always check
the fabric care labels for
recommendations. Test the
fabrics for colorfastness in an
inconspicuous place such as
an inside seam. Some articles
of clothing are better steamed
from the underside.
IMPORTANT:
When
assembling your fabric steamer,
there may be a little water in
the water tank. This is because
we test all our fabric steamers
100% before you buy them, so
you get a quality Shark
®
Steam
product.
Getting Started
First things first, you need to
know what’s in the box you
just opened:
a
Fabric Steamer with small
steam bonnet attached
b
Bristle Brush Frame
c
Upholstery/Delicate Fabric
Frame
d
Lint Brush Frame
e
Upholstery Steam Bonnet
f
Delicate Steam Bonnet
Assembly & use instructions:
1
Safely remove contents of the
Press & Refresh
™
Garment Care
System and lay them out on a
flat surface to see that you have
all the components to complete
the assembly.
2
READ ALL INSTRUCTIONS
BEFORE USING YOUR PRESS
& REFRESH
™
GARMENT CARE
SYSTEM.
3
Only use water. To extend the
life of your Press & Refresh
™
Garment Care System, we
recommend using distilled
water if you live in an area with
hard tap water.
4
Do not add cleaning solutions,
scented perfumes, oils, or
any other chemicals to the
water used in this appliance
as this may damage the unit
or make it unsafe for use. Use
of any substances other than
manufacturer’s recommended
accessories will automatically
void your warranty.
Assembly of the Vertical Press Pad
The
Press & Refresh
™
Garment Care System
brings your fabrics back to life without a trip to
the dry cleaners! Shark
®
Steam Technology provides continuous powerful vertical steam that deeply
penetrates fabrics and renews fibers.
The Wrinkle Eraser
™
heat bar simulates the soleplate of an iron and presses the fabric for a crisp
finish. Press the Wrinkle Eraser
™
directly onto the garment for a crisp finish. Hold the steam trigger for
continuous steam.
Not only great on garments, the
Press & Refresh
™
can be used anywhere around the home:
upholstery, bedding, curtains and more!
The
vertical press pad
makes garment care easy! Simply setup the pad onto any door, hang your
garment and
Press & Refresh
™
!
g
h
i
j
k
l
2
The Vertical Press Pad comes
asembled with heat protection
panels in the pockets on the
back. These panels protect your
door from heat damage and
should be in place at all times
during use.
3
Slip the webbing bands at the
top of the vertical press pad
over either side of any door
with the terry cloth side facing
away from the door. With
the door open, loop the band
around the corner of the door
and repeat on the opposite
side. Gently tug on the pad
to make sure it is secure and
shut the door completely to
ensure the Vertical Press Pad is
stable for pressing. Be careful
not to close the door on your
fingers. Adjust the straps on
the webbing to the appropriate
height for comfort (
Fig. 3
).
TIP:
The straps can be adjusted
to fit any door using the buckle
to adjust the strap lengths.
Assembling the vertical
press pad:
1
Insert the garment hook into
the top of the vertical press
pad (
Fig. 1
). Insert one of the
support rods into the opening
on the side of the Vertical
Press Pad making sure that it
is inserted firmly into the hook
(
Fig. 2
). Do the same with the
other support rod from the
other side.
g
Vertical Press Pad
h
Support Rods (x2)
i
Garment Hook
j
Heat Protection Panels (x8)
k
Velcro
™
Clips (x3)
l
Filling Flask
*Note: Model GS500W also includes
1 Accessory Bag, a 2 oz. bottle of Linen
Water and a 1 oz. Stain Stick.
Fig. 3
Fig. 2
Fig. 1
a
b
c
e
d
f
GS500_series_IB_ES_100616.indd 8-9
10-06-16 11:46 AM