12
TOLL FREE:
1-800-798-7398
13
www.sharkclean.com
English
3
Upholstery/Delicate Fabric
Frame & Delicate Steam
Bonnet –
to refresh and
deodorize delicate items safely.
Fabric Recommendations:
Silk, satin, embellished
garments.
TIP:
When steaming a
delicate garment with many
embellishments such as a
sequin dress, turn the garment
inside out and steam from the
inside to deodorize and refresh.
1
Bristle Brush Frame –
is the
standard frame to use when
steaming garments. It offers
better steam penetration for
heavy fabrics without leaving
water marks. Always use the
bristle brush frame with the
small bonnet over the steam
nozzle.
Fabric Recommendations:
Cotton, wool, canvas, denim.
CAUTION:
Do not use the
bristle brush on delicate fabrics.
When to use the different
accessories:
Using Your Press & Refresh
™
- cont.
Care of Your Press & Refresh
™
Troubleshooting Guide
Cleaning & storing
1
Turn the fabric steamer “Off”.
2
Unplug the appliance from the
electrical outlet.
3
Let the appliance cool
completely for approximately
30 minutes before emptying the
water from the water tank.
4
Empty the water from the
water tank.
Care & use of steam nozzle
bonnets
7
The steam bonnet is attached
to a frame on the nozzle. Gently
pull the frame off of the nozzle.
Hand wash the bonnet in cold
water with a mild detergent
after each use and let air dry
completely before using again.
Do not dry in clothes dryer.
PROBLEM
POSSIBLE
REASONS
SOLUTIONS
There is no
steam.
The steamer is not turned on.
There is not enough
water in the unit.
Verify that the blue light on the unit is lit. If not,
check that the unit is plugged in and the on/off
button is raised and in the “On” position.
Verify that the water line is above the “Refill”
line. If not, add more water to the tank.
The nozzle leaves
water drops on the
garment.
You are not using the steam
bonnet.
The steam bonnet is
too wet.
The frame has condensation.
It is recommended to use the steam bonnet on
the nozzle to prevent water drops being left on
the garment and to improve performance.
After letting the steam nozzle cool, remove the
steam bonnet and let it dry out before using
again.
Let the appliance cool and wipe the frame off.
2
Lint Brush Frame –
use to
remove hair, lint and pet fur
while steaming your garments.
Always use the lint frame with
the small steam bonnet over the
steam nozzle.
Fabric Recommendations:
Silk, polyester, cotton, wool,
rayon.
5
Wipe the exterior of the fabric
steamer with a damp cloth and
wipe dry.
6
Bundle up the power cord and
secure it with the Velcro™
strap that is attached to the
power cord. Always store your
appliance in a cool, dry area.
4
Upholstery/Delicate
Fabric Frame & Upholstery
Steam Bonnet –
refresh
and deodorize upholstered
items like sofas and chairs as
well as curtains, bedding, and
mattresses
5
Small Steam Bonnet –
provides evenly distributed
steam and prevents
condensation on the garments/
fabrics.
6
Velcro
™
Clips –
Easy detachable clips may be
used on the vertical pressing
pad for positioning garments for
steaming. They can also be used
to hold lightweight garments
directly on to the pad
7
Vertical Press Pad –
Convenient way to steam and
press garments. Eliminates the
hassle of an ironing board.
The Vertical Press Pad can be
used on any type of door and
is virtually invisible when the
door is closed for easy access
to the pad for last minute touch
ups. The Vertical Press Pad also
has web hooks on either side,
to provide convenience when
pressing sleeves and creating a
larger pressing surface.
The small steam bonnet
should always be in place
over the steam nozzle when
steamer is in use
GS500_series_IB_ES_100616.indd 12-13
10-06-16 11:46 AM
