Shaper Origin S01-NN, Product Manual

Page: 21 / 32

shapertools.com 19
Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord. Cut-
ting a “live” wire may make exposed metal parts of
the power tool “live” and shock the operator.
Use clamps, or other practical ways to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
It is recommended to use a spoil board under-
neath your material when doing a through cut.
Adhere workpiece elements that may come loose
during cutting. When cutting items out of work-
piece materials, use PSA (Pressure Sensitive Ad-
hesive) or alternative methods to hold elements
down to your workbench and/or spoil board. This
will prevent items from coming loose when cutting
is complete.
Only use router bits with the correct shank size
for the SM1 Spindle and spindle collet supplied
with Origin. MAXIMUM ALLOWABLE CUTTER DIAM-
ETER IS 1” (25.4mm).
Check work area for items added after initial
scan. Origin’s on-screen images are reconstruc-
tions based on previous scans. They may not show
items on your workpiece that were placed there
after a. Always check your work area for potential
obstacles immediately before routing.
Only operate Origin with the SM1 Spindle provid-
ed by Shaper. Use with any other router spindle
will cause damage and may result in a risk of elec-
tric shock.
Router Safety Warnings
Safety & Care