Shaper Origin S01-NN, Product Manual

Page: 17 / 32

shapertools.com 15
Do not expose power tools to rain or wet condi-
tions. Water entering the power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the
risk of electric shock.
When operating power tools outdoors use an ex-
tension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is
unavoidable use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Use appropriate extension cords. Only use un-
damaged extension cords that match Origin’s plug.
Extension cords should have an adequate voltage
and current rating that meets or exceeds the elec-
trical specifications listed on the product label.
Always make sure that the spindle motor’s con-
nector is securely plugged into the side of Origin
while operating.
Stay alert, watch what you are doing and use
common sense when operating power tools. Do
not use power tools while you are tired, or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating power
tools may result in serious personal injury.
Use personal protective equipment. Always wear
eye protection. Protective equipment such as
Personal Safety
Safety & Care