User’s Guide
HRP 220
-
32
-
HS
Installation and removal of units
12
4.
Loosening the wiring:
a
Disconnect wires from the terminals on the rear of the
control unit.
b
Take the flat plug out of the distribution block.
Attention!
These plugs are secured. Bend the safety
clip up slightly in order to remove it. If necessary first
remove the plugs above it.
5.
Unscrew the two socket head screws. The screw at the front is
easiest to reach by unscrewing the frame plate on the front.
6.
Remove the unit from the machine.
12.2.2
Installation
Installation is done in the reverse order.
4b
Distribution block
Safety clip
Terminal
4a
5a
5b
6
Summary of Contents for HRP 220
