www.shakmat.com
•
12/19
6.1.2
Trimmers 1k (x4)
P1
Place & solder the 4 1k trimmers one by one. Be careful to put them in the
right direction. The little adjustment screw must be pointing outward.
Potentiometer nuts (x3) P1
7. Finish
You’re almost done! The last thing
to do is to mount the front panel
and place the nuts on the potentio-
meters and jack sockets.
Finally, push the four knobs onto
their metal potentiometer and
you’re done with the building part!
Jack nuts (x9)
P1
Knobs (x3)
LP
