ShadeLab SHAN, Instruction Manual

Page: 4 / 32

2 I SHAN I
INSTALLATION – REV 00
1 – INTRODUCTION
This “assembly manual” for SHAN awnings has been produced by SHADELAB to supply the indications
necessary for the operations of assembling the components that make up the product.
Assembly must be carried out by personnel with suitable technical and professional qualifications, in
accordance with the respective national laws or regulations (see Par. 1.2 “Personnel requirements”).
It is forbidden to eliminate, rewrite or alter the pages in the manual and their content.
This manual must be kept intact in all its parts, in an easily accessible place.
SHADELAB reserves the right to update the production and the respective manuals, without being obliged
to update the previous production and manuals.
SHADELAB reserves all rights to this manual: no total or partial reproduction is allowed without authorisation
in writing.
1.1 - Symbols used in the manual
Shown below are the WARNING symbols used in this manual:
1.2 - Personnel requirements
The personnel appointed to perform this operation must possess a technical knowledge of the product,
acquired by assembling similar products for at least one year or after having followed a suitable technical
training course.
IMPORTANT
Indications and advice to be observed to ensure a correct use of the awning. Failure to follow these
indications may endanger the integrity and/or resistance of the product.
ATTENTION
DANGER FOR THE OPERATOR! Instructions and indications to be assessed and followed with care.
Failure to follow these indications may endanger personal safety.