ShadeLab SHAN, Instruction Manual

Page: 25 / 32

SHAN
I
INSTALLATION
–
REV 00
FIXING SADDLE PROFILE
WARNING: Place the cover profile supports (ref. 21) in correspondence of the stitchings and one in
the centre; secure with the M6 screw (ref. 22) previously inserted (allen wrench 5).
WARNING: Fit the end plate (ref. 23) to the cassette, making sure the L50 self-tapping screws (ref.
24) are inserted into the saddle profile.
WARNING: Slightly tighten the M6 dowels (ref.25) onto the cover profile supports, just enough to
adjust the tightness between cover profile support and saddle profile (allen wrench 3).
COUPLING COVER PROFILE
WARNING: Insert the cover profile onto the pre-assembled joint and fix the M6 countersunk screws
(allen wrench 5).