5
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of
the product. If damaged, it must not be put into operation. This product may
only be installed by a qualified technician.
Installation:
1. Disconnect from the mains.
2. Secure against being switched on again.
3. Verify that there is no voltage to your cable.
4. Follow the enclosed instructions. (fig 1-2.)
Warning: When the LEDs keep glowing, please check if you connected the flood-
light correctly (L/L, / and N/N) (Fig 3.)
09 Operating the product
The safety instructions and warnings must be observed to ensure both the per-
fect condition of the product and safe operation.
L
N
(fig 3.)
easy to connect
TIME
SENS
LUX
(fig 4.)
≈
100°
1,8-2,5m
(fig 1.)
(fig 2.)
X
X
10 Product maintenance
The driverless floodlight can be cleaned with clear water and a soft cloth. Do not
use detergents containing surface active agents or scouring agents.
Sensor
A
B
C
A - detection Distance 8-10m
Detection angle
100°
B - Work time
5s - 10m
C - Twilight sensor
3-1000 Lux
30071X-MAN-ML-2017122001-SHA - Complete Book A5.indb 5
2017-12-20 13:30:03
