PAGE 12
SET UP
CONNECTING THROTTLE WIRE
M3 screw
Insert the
cable
to the end
of
adjuster
Full on
stopper
Idling adjust screw
1. Connect throttle wire with carburettor. Insert the cable
to the end of adjuster fix the throttle cable by tightening the
M3 screw. (Tightening torque: 0.4 ~ 0.8 N.m.)
2. Make sure the ‘STOPPER-PLATE’ of carburettor moves
to contact with ‘IDLING ADJUST SCREW’ and the ‘SWING-
ARM’ of carburettor moves to contact with ‘FULL ON STOP-
PER’ by gripping throttle lever.
CONNECTING SWITCH WIRES
Connect the switch wires between the engine and the main
unit. Pair wires of the same colour.
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850
