PAGE 14
SET UP
Loop
handle
Suspension
point
HANDLE AND SUSPENSION POINT
The recommended position of the handle and suspension
point is marked above. However you may adjust the position
to make sure it is comfortable for you.
INSTALLATION OF HANDLE
Set the upper part and lower part of
the handle at the right position.
Tighten the loop handle with the
screw and nut.
Insert the nuts (4) into the counter-
sunk holes in the lower handle and
secure the top part of the
handle with the bolts supplied (4).
ZZ
NOTE
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850
