PAGE 42
OPERATION
The thickness of branches, which may be cut using this
trimmer, is limited to up to approximately 3/16" (5 mm).
Never try to cut branches thicker than this, as doing so
may result in damage to the trimmer.
WORKING WITH THE HEDGE TRIMMER
1)
2)
2)
(1) Safety Rod
(2) Adjustment mechanism
1. Stop the engine
2. Fit the protective cover on the blades
3. Pull out the safety rod (1).
4. Turn the adjustment mechanism to adjust the
angle of the hedge trimmer head.
ZZ
NOTE
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850
