18
• Attach all load bearing devices directly to the piston rod.
• Do not use any stroke extension between lift and lifting gear (cross
member, gear box plate etc.).
• The lifts are not suitable for use in car wash systems; if used there,
they must be suitably covered and protected to prevent damage
from the high humidity. The warranty does not cover rust! Residue
from underbody sealing compounds will destroy the seals.
• Due to the corner load of the supporting plates, damage to the floor
cannot be ruled out. Covering with tiles is only appropriate when the
floor is very level.
• Under normal operating conditions, this universal lifting device is
completely stable. Since the chassis is not secured against tipping
on the floor, you should be aware of the possible dangers. Therefo
-
re, side loading should always be avoided.
5. MAINTENANCE
5.1.
Special instructions
Original SOMMERER PIT LIFTS require minimal maintenance. It is
important that the piston rod be kept clean. Damage must be
immediately polished out with a gentle transition. When working with
strongly adhering underbody compounds (underbody protection, wax
etc.) the piston rod must be fully covered or - before lowering the lift -
cleaned
Such compounds gum up the upper dirt and water wiper ring, which
then no longer functions properly.
►
Do not clean pit lifts with high-pressure or steam cleaners,
since
cleaning agents can penetrate the valves and cause
malfunctions.
5.2.
Maintenance
The piston rod, studs of the load carrying device, running rollers and
other moving parts must always be lightly oiled.
