manualshive.com logo in svg

SGM X Line IDEA WASH 575, User Manual

Share
Download
SGM X Line IDEA WASH 575 User Manual Download Page 6

SGM Technology for Lighting 

 

GB 

WIT074 V1.0-01NR 

 

Idea Wash 575

 

4

GENERAL GUIDELINES 

 
This device is a lighting effect for professional use on stages, in discotheques, theatres, etc. 
This fixture is only allowed to be operated with the max alternating current which stated in the technical 
specifications in the last page of this manual, the device was designed for indoor use only. 
Lighting effects are not designed for permanent operation. Consistent operation breaks may ensure that the 
device will serve you for a long time without defects. Do not shake the device. 
Avoid brute force when installing or operating the device. 
The device shall only be used complete with its protective shield. 
 
While choosing the installation-spot, please make sure that the device is not exposed to extreme heat, 
moisture or dust. The minimum distance between light-output from the projector and the illuminated 
surface must be more than 0,5 meter. 
 
Always fix the fixture with an appropriate safety cable if you use the quick lock cam in hanging up the fixture, 
please make sure the 4 quick lock fasteners turned in the quick lock holes correctly. 
 
Operate the device only after having familiarized with its functions. Do not permit operation by persons not 
qualified for operating the device. Most damages are the result of unprofessional operation. 
Please use the original packaging if the device is to be transported. 
For safety reasons, please be aware that all modifications on the device are forbidden. 
 
If this device will be operated in any way different to the one described in this manual, the product may 
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to 
short-circuit, burns, electric shock, lamp explosion, crash, etc. 
 

Summary of Contents for X Line IDEA WASH 575





























Reviews:

No comments

Brands by name

Popular brands

Load more brands