SGM Technology for Lighting
GB
WIT074 V1.0-01NR
Idea Wash 575
16
- Lamp adjustment
With this function you can adjust the lamp via the Control Board. The shutter opens and the lamp can be
adjusted. In this mode, the device will not react to any control signal.
1.
Select
“LADJ”
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3.
Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you
don’t.
4.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Test function of each channel
With this function you can test each channel on its (correct) function.
1.
Select
“TEST”
by pressing
[UP]
button.
2.
Press
[ENTER]
, the display shows “T-XX”, “X” stands for the channel number.
3.
The current channel will be tested.
4.
Select the desired channel by pressing
[UP]
or
[DOWN]
button.
5.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Fixture code and motor fix
1.
Select
“WHEL”
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows
“CODE”
or
“CH01-CH30”
.
3.
Select
“CODE”
or
“CH01-CH30”
by pressing
[UP]
or
[DOWN]
button.
4.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Main menu 4
1.
Press
[MODE/ESC]
to enter the main menu (display flashing).
2.
Press
[UP]
or
[DOWN]
button to select
“TIME”
.
- Fixture running time
With this function you can display the running time of the device.
1.
Select
“MATI”
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows “XXXX”, “X“ stands for the number of hours.
3.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Lamp running time
With this function you can display the running time of the lamp.
1.
Select
“LATI”
by pressing
[UP]
button.
2.
Press
[ENTER]
, the display shows
“XXXX”
, “X“ stands for the number of hours.
3.
Press
[MODE/ESC]
to return to the main menu.
- Clear fixture time
With this function you can clear the running time of the device.
1.
Select
“CLMT”
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3.
Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you
don’t.
4.
Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
