23
Service
There are no user-serviceable components inside the device. Do not open the SP-6
SixPack, as doing so is likely to damage its ingress protection. Consult your SGM dealer
if the device operates abnormally, is defective or otherwise in need of service or repair.
The mains fuse can be found under the cover next to the power inlet socket. The fuse
cover can be opened using a slotted screwdriver.
Upgrading the firmware
The firmware installed on the fixture can be identified using the “Info→Firmware version” menu. We recommend
that you to keep your device’s firmware current. Visit http://www.sgmlight.com to obtain the most up-to-date
firmware. To perform firmware updates, you need a Windows personal computer and an SGM USB 5-Pin-XLR
upload cable (available from your SGM distributor: P/N 40500201).
Cleaning
To obtain optimal performance, regular cleaning is essential. Cleaning schedules will vary greatly depending on the
operating environment, and the fixture should therefore be checked at frequent intervals within the first few weeks
of operation to see whether cleaning is necessary. This procedure will allow you to assess cleaning requirements
in your particular situation. If in doubt, consult your SGM dealer for a suitable maintenance schedule. Clean the
SP-6 SixPack using a soft cloth dampened with a solution of water and a mild detergent. Do not use products that
contain solvents, abrasives or caustic agents for cleaning, as they can cause damage to both hardware, cables and
connectors.
Summary of Contents for SP-6 SIXPACK
