12
Attaching snap-lock brackets
Two snap lock brackets are supplied with each fixture and these are used to connect
fixtures together in arrays.
To remove the stand bracket and mount the snap-lock brackets:
1. Unscrew the tilt locks on each side of the fixture and detach the stand.
2. Remove the two Torx 25 screws that hold the safety cable eyelet in place and
remove the eyelet.
3. Attach the snap lock brackets as shown, so that the male and female parts are
placed at opposite ends.
1
2
3
Summary of Contents for SP-6 SIXPACK
