20
Powerlight 1212 version1.01
2.11 Run Chase
In this menu, it's possible to run the Chase previously programmed with the possibility of
adjusting the chase's times and master level.
To access the programming function of the
Run Chase
menu, proceed as follows:
1.
Select the
RUN CHASE
menu from the main menu;
2.
Press
ENTER
to confirm the choice;
3.
At this point, the following appears on the display:
CHS:
Chase
CR:
CROSS Time expressed in secondsi
SP:
SPEED expressed in seconds
LEV:
general light output level assigned to the CHASE (0-255)
4.
For the chase selected in the
CHS
field, set the CROSS and SPEED times required and the
general light level.
5.
Press
ESC
to confirm changes and return to the main menu.
2.12 Curve Equaliz (Curve Equalization)
In this menu, it's possible to assign each channel the most suitable setting for controlling the
load on output according to the type of lamp used. The 6 curves available are shown in the
diagram.
1-
linear curve
2-
logarithmic curve 1
3-
logarithmic curve 2
4-
logarithmic curve 3
5-
logarithmic curve 4
6-
logarithmic curve 5
7-
on / off curve
CHS CR SP LEV
[1] 55 55 255
<Main Menu >
[Run chase ]
www.audiovias.com
Summary of Contents for Powerlight 1212D
Page 1: ...www audiovias com...
Page 25: ...www audiovias com...
