18
Powerlight 1212 version1.01
2.8 Version
This Menu gives information on the software version installed in the Power Light.
Version is a menu only used for consultation, in which no parameters can be changed.
For access to this function, proceed as follows:
1.
Select the
Version
menu from the main menu;
2.
Press
ENTER
to confirm the choice;
3.
At this point, the current version of the software will appear on the display.
4.
Press
ESC
to return to the main menu.
2.9 Run Autotest
This Menu runs an autotest routine which enables irregularities to be found in some crucial points
of the Power Light. In fact. the following parameters are checked:
- the presence (or not) of DMX signal on input;
- any excess voltage on input,
- correct operation of both fans;
- the presence (or not) of RS-232 signal on input;
- the temperature on the cooling fins expressed in degrees Centigrade and Fahrenheit.
Run Autotest is only an executive menu - no parameters can be modified.
For access to this function, proceed as follows :
1.
Select the Autotest Run menu from the main menu;
2.
Press Enter to confirm the choice;
3.
A this point, the results of the measurements made for all the abovementioned parameters will
appear one after another on the display.
4.
Press Esc to return to the main menu.
AUTOTESTING
[OVERLOAD NO]
<Main Menu >
[Version ]
SGM Electronics
P1212 ver. 1.00
<Main Menu >
[Version ]
www.audiovias.com
Summary of Contents for Powerlight 1212D
Page 1: ...www audiovias com...
Page 25: ...www audiovias com...
