G
GB
B
appendix
I
D
F
E
Powerlight 1212 version1.01
17
2.6 Brightness
In this Menu, it's possible to vary the brightness of the LCD display on the front panel. This
brightness is expressed as a percentage and varies between 0 and 100%.
The standard factory setting of the LCD brightness is 75%
For access to the
Brightness function
, proceed as follows:
1.
Select the Brightness menu from the main menu;
2.
Press Enter to confirm the choice;
3.
The square brackets are positioned on the only field. Use the
UP/DOWN
arrows to reach the brightness required.
4.
Press
Esc
to return to the main menu: the selected data are updated automatically.
2.7 Signal Monitor
In this Menu, it's possible to check the level of the signal for controlling the channels on input.
Only one channel can be checked at a time.
For access to the
Signal Monitor function
, proceed as follows:
1.
Select the Signal Monitor menu from the main menu;
2.
Press
ENTER
to confirm the choice;
3.
The square brackets will be positioned on the CHN field to allow the channel to be selected.
4.
Once the channel has been selected, the signal level will automatically appear in the
LEV
field.
This field cannot be modified as it only displays the signal level on input.
5.
Press
ESC
to return to the main menu.
CHN LEV
[1] 0
<Main Menu >
[Signal monitor]
< BRIGHT >
[ [75%] ]
<Main Menu >
[Brightness ]
www.audiovias.com
Summary of Contents for Powerlight 1212D
Page 1: ...www audiovias com...
Page 25: ...www audiovias com...
