G
GB
B
appendix
I
D
F
E
Powerlight 1212 version1.01
19
2.10 Edit Chase
The P1212 has been designed and built so that it can also be used as a free-standing unit, without
the aid of an external controller. It's possible to create 8 different sequences (Chases) with a
maximum of 32 scenes (Steps) each.
For access to the programming function of the
Edit Chase menu
, proceed as follows:
1.
Select the
EDIT CHASE
menu from the main menu;
2.
Press
ENTER
to confirm the choice;
3.
Now select the number of the Chase to be programmed, which can be between 1 and 8
4.
Press
ENTER
to confirm the choice;
5.
At this point, the following appears on the display:
LN:
Maximum number of steps
ST:
Current step
CHN:
Channel
(
A
AL
LL
L
set all the channels)
LEV:
light output level assigned to the channel (0-255)
6.
Firstly, set the maximum number of steps that the chase in the LN field must have
7.
Move the square brackets to the ST field and select the first step to program.
8.
Move the square brackets to the CHN field and select the channel whose output level has to
be adjusted.
9.
Move the square brackets to the LEV field and change the output level to the required value.
10.
Repeat points 7-8-9 for all the steps.
11.
Press ESC to confirm the changes and return to the previous menu.
LN ST CHN LEV
[10] 1 1 255
<Edit chase >
Chase [1]
<Main Menu >
[Edit chase ]
www.audiovias.com
Summary of Contents for Powerlight 1212D
Page 1: ...www audiovias com...
Page 25: ...www audiovias com...
