GB
SGM
Idea Spot 700
XM473-V1.0-NR
７
Mounting the device
CAUTION
Pleas consider the EN 60598-2-17 and the other respective national norms
during the installation. The installation must only be carried out by a
qualified person.
The applicable temperature for the lignting is between -25°C to 45°C. Do not use the lighting under or
above the temperature.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety
rope.
Never stand directly below the device when mounting, removing or servicing the fixture.
The operator has to make sure the safety relating and machine technical installations are approved by an
expert before taking the device into operation for the first time.
These installations have to be approved by a skilled person once a year.
The lighting should be put in a relatively broad space. Ensure there is no barrier in the range of 50cm²
around the lighting.
CAUTION
Before
taking into operation for the first time, the installation has to be
approved by an expert.
Cautions:
The effect should be installed outside areas where persons may reach it, walk by or be seated.
CAUTION
When installing the device, make sure there in no highly inflammable
material within a distance of min. 0,5m
Overhead mounting requires extensive experience, including amongst others calculating working load
limits, installation material being used, and periodic safety inspection of all installation material and the
device. If you lack these qualifications, do not attempt the installation yourself. Improper installation can
result in bodily injury.
CAUTION
The electric connection must only be carried out by a qualified electrician.
Before mounting make sure that the installation area can hold a minimum point load of 10 times the
device’s weight.
Connect the fixture to the mains with the power plug
