SGM I-SERIES, User Manual

Page: 15 / 28

15
Level 1 Level 2 Level 3 Level 4 Function
MODE Select Mode - - Select DMX mode.
INFO Product Type - - Display product type.
Firmware Version - - Display installed firmware version.
Serial Number - - Display fixture’s serial number.
RDM ID - - Display RDM ID. (Unique RDM ID for identification).
DMX View - - Display received DMX levels.
Temperatures
MB: LED:
- - Display mainboard an LED panel temperatures.
Power On Time - - Display fixture’s total power on time.
Power On time
Resettable
(R, G, B, W)
- - Display fixtures power on time (can be reset. i.e. for service use).
LED On Time - - Display LED total power on time (R, G, B, W).
LED On Time
Resettable
(R, G, B, W)
- - Display LED power on time (R, G, B, W - can be reset. i.e. for service use).
Log - - Display recorded operating data and error codes.
Debug - - Service use only.
SETTINGS Wireless DMX Log Off - Send Log off command to the CRMX System.
Wireless LED - Flashing: not receiving data.
Solid: receiving data.
Enable - Enter to enable DMX wireless operation.
Disable - Enter to disable DMX wireless operation.
Wireless DMX
Out Enable
- Enable wireless out operation.
(Received Wireless DMX is transmitted to cabled DMX Out)
Wireless DMX
Out Disable
- Disable wireless out operation.
Startup Mode Select Startup Mode DMX Default operating mode. Fixture starts up in DMX mode (factory default).
Standalone Default operating mode. Fixture starts up with selected standalone program.
Quickcolor Default operating mode. Fixture starts up with defined quickcolor.
Startup Program 1 → 3 Select program to run at start-up (program 1 is default). Only used if the
startup mode is set to “standalone”.
Dimming Curve Linear - Provide equal resolution dimming from 0-100%
Gamma Corrected - Provide high-resolution dimming at low levels.
White Calibrated Calibrated - Enable white calibrated color.
Raw - Enable raw color.
Flip Display Disable - Select normal control panel display.
Enable - Flip control panel display.
Display Saver Display Dim - Dim the OLED display when the control panel is not in use.
Display Off - Turn off the OLED display when the control panel is not in use.
Fan Mode Standard - Adjust fan speed relative to internal fixture temperature.
Silent - Low fan speed for quiet operation.
Max Power - High fan speed for maximum cooling effect.
Always Full Power - High fan speed with no adjustment.
Minimum values 0 → 8000 - Adjust default minimum setting (0-8000). Service use only.
RFID Write Enable - Enable the RFID entry for the SGM Tool.
Disable - Disable the RFID entry for the SGM Tool.
Refresh Rate Dimming optimized - Set the LED’s to a dimmer optimized default (factory default).
See “Setting the LED refresh rate (Frequency)” on page 13 for details.
High freq. optimized - Set the LED’s to a high frequency optimized default.
See “Setting the LED refresh rate (Frequency)” on page 13 for details.
Custom value - Set a custom frequency (refresh rate) for the LED’s.
See “Setting the LED refresh rate (Frequency)” on page 13 for details.
Control menu - part I