24
POI Permanent Outdoor Installation
The i-5 Wash comes in a special POI version designed for permanent outdoor installation and is IP66-rated.
POI versions are designed for use in maritime and offshore environments, as per the C5-M corrosion-resistance class.
Physical differences
The POI version differs from the standard version by having fixed-chassis mounted power and DMX cables and heavy-duty
cable glands. The display / control panel, RFID, wireless antenna and XLR DMX connectors, has been removed.
Configuration
The POI version is configured exclusively via RDM (Remote Device Management).
DMX start address, DMX mode etc. are configured via RDM. See “RDM” on page
26.
LED indicator
An LED indicator is located on the side of the base.
This LED indicator has two colors and three stages; on, flashing or off.
•
Green static: Fixture is on and receiving DMX.
•
Green flashing: Fixture is on and no DMX is received.
•
Red flashing: An error message is stored, review via the SGM Service Tool.
Contact SGM support for diagnostic help. See “Support hotline” on page
30.
•
Off: Fixture is off or indicator LED (display) is set to off or auto dimming.
Connecting DMX and AC power
DMX in and DMX out are in the same cable. See description on the right.
Power is wired as the standard version. See “Connecting AC power” on page
17.
SGM SGM SG
Shield
Wire
Color
Conductor
White
Red
Black
Yellow
Ground
DMX IN: Data -
DMX IN: Data +
DMX OUT: Data -
DMX OUT: Data +
