15
Installation / Rigging
WARNING!
Always secure elevated fixtures with a safety cable.
The i-5 may be installed in any orientation.
Always use an omega bracket to rig the fixture. Lock the bracket with the
1/4-turn fasteners.
The fasteners are locked only when turned fully clockwise.
Always fasten a safety wire between the load-bearing support structure
and the attachment point on the fixture. The safety cable must be able to
bear at least 10 times the weight of the fixture.
CAUTION
:
• Always use a safety wire.
• Min. safety wire gauge = 4 mm.
• Max. safety wire length (free fall) = 30 cm (12 in.)
• Make sure the slack of the safety wire is at a minimum.
• Never use the yoke for secondary attachment.
Safety wire attachment point
