18
Display panel operations
The display panel can be used to configure individual fixture settings, check the fixtures firmware version and error
messages. When the fixture is powered on, it boots and resets, before displaying the DMX start address.
Using the display panel
•
Press the ‘ENTER’ button to enter a menu or make a selection.
•
Press the arrow buttons to scroll up and down the menus.
•
Press the ‘ESC’ button to take a step back.
•
Press the ‘UP’ and ‘DOWN’ arrows simultaneously to flip the display upside-down.
Shortcuts
ESC + ENTER: “Press ‘ENTER’ to confirm factory defaults”
ESC + DOWN: “Press ‘ENTER’ to unpair CRMX”
ESC + UP: “Press ‘ENTER’ to start LED test”
6CH CTC MODE
101
(107)
DMX
ESC
ENTER
