21
D
Giotto spot r
el.1.00
E
F
E
EN
N
I
Appendix
3.18 - SLLF
This is an energy-saving function. If the function is enabled (SLLF=ON), the fixture reduces lamp power by dim-
ming it electronically after the shutter has been closed for 30 seconds.
Maximum power will automatically be restored as soon as the shutter is reopened.
To enable this function, proceed as follows:
1. Connect Giotto Spot to the power supply, wait till it has completed reset operations and “DMX signal” appears
on the display.
2. Use the UP/DOWN keys to find the “SLLF” menu.
3. Press “Enter” to confirm. The message on the display will start to flash.
4. Use the UP/DOWN keys to select the required option.
5. Press “Enter” to confirm changes.
3.19 - Reserved functions
Some fixture functions can't be accessed by operators as they regard software sections as yet to be defined in
this firmware release. When RESERVED appears on the display, you're in this section. Access is forbidden.
