14
Giotto spot r
el.1.00
3.0 - “Control” microcomputer
Giotto Spot 1200 is equipped with a microcomputer which allows to customize the fixture to suite the type of installation.
In fact, it's possible to assign the start address; obtain information regarding lamp life and fixture operation time; run test
programs to check correct fixture operation and customize some parameters.
3.1- Navigating in the menu
When it's switched on, the fixture runs a start-up reset procedure and the display indicates if there's an input signal or not.
The 3 keys under the display are for selecting and using the various submenus which make up the main menu.
- UP/DOWN
keys: used to scroll the various items in the menu. In the selected menu, used to change the required para-
meters.
- ENTER key:
used to access to the selected menu and, once the necessary changes have been made, is used to confirm
them.
E010485 -
13
1
1
Giotto 1.4
E010485 - 1.
3
Giotto 1.4
E010485 -
13
2
2
Accel
