Page 19 of 24
Pmag
- Setting
Press the
key from run mode: the display will be as shown here next.
With
or
select the parameter setting.
Press
to confirm, the display will be as shown here next.
press the
key to exit and confirm the selection; press the
key to exit and
delete the selection.
8.7.2.5 -
Total Set
Press the
key to enter the submenu “Total Set” .
8.7.2.5.1 -
Password
To access the menu "Total Set" may need to enter the correct password.
The default password: 0020
After entering, you can change the password
Note
: If forget password can not access the menu.
8.7.2.5.2 -
Clear Total
Reset totalizer
Default: NO
Range: NO - YES
Press the
key from run mode: the display will be as shown here next.
With
or
select the parameter setting.
Press
to confirm, the display will be as shown here next.
press the
key to exit and confirm the selection; press the
key to exit and
delete the selection.
8.7.2.5.3 -
FWD Preset
Predetermines the positive totalizer value
Default: 0000000000
Range: 1÷9999999999
Press the
key from run mode: the display will be as shown here next.
With
or
change the digit, with
moves the cursor.
Press
to confirm, the display will be as shown here next.
press the
key to exit and confirm the selection; press the
key to exit and
delete the selection.
