Page 14 of 24
8.7.1.5 -
Damping (s)
Damping(S) sets the delay time in seconds for changes in reading. It 'used to mitigate
the fluctuations in flow measurement.
Default: 1; Range: 0.1÷99.9
Press the
key from run mode: the display will be as shown here next.
With
or
change the digit, with
moves the cursor.
Press
to confirm, the display will be as shown here next.
press the
key to exit and confirm the selection; press the
key to exit and delete
the selection.
8.7.2 System Configuration (System)
Press the
key from run mode, then press the
key to select "System" and press
the
button to enter.
Press the
or
keys to select the desired function and press the
key to access
To access the menu "System" may need to enter the correct password.
The default password: 0100
After entering, you can change the password
Note
: If forget password can not access the menu.
8.7.2.1 -
Language
Allows menu language selection.
Default: English
Press the
key from run mode: the display will be as shown here next.
Press
to confirm, the display will be as shown here next.
press the
key to exit and confirm the selection; press the
key to exit and delete
the selection.
8.7.2.2 -
Signal
Press the
key to enter the submenu "Signal"
Press the
key from run mode: the display will be as shown here next.
With
or
select the decimal number places to display.
Press
to confirm, the display will be as shown here next.
press the
key to exit and confirm the selection; press the
key to exit and delete
the selection.
Pmag
- Setting
