Page 31 of 36
www.sgm-lektra.eu
FLOWMETER -
configuration
8.6.6.1 - DISPLAY VALUES
Position the cursor on DISPLAY VALUES, press ENTER to confirm.
Displays the max. and min. distance measured from power on.
LEFT ARROW to exit.
NB - The peak values stored are erased every time the FLOWMETER turns-off
DISPLAY VALUE
RESET VALURE
►
PEAK VALUE m³/h
MAX FLOW
000124.00
MIN FLOW
000002.00
8.6.6.2 - RESET VALUES
Position the cursor on RESET VALUES, press ENTER to confirm.
LEFT ARROW to return to the previous menu.
8.6.7 - START TOTALIZER
Position the cursor on RESET VALUES, press ENTER to start the the flow totalizer.
After starting the totalizer is not possible to stop the totalization.
PRIMARY DEVICE
SELF CALIBRATION
MEASURE STATUS
FROZEN GAIN
MAX GAIN TH
PEAK VALUE
START TOTALIZER
ALARM CONFIGURATION
►
8.6.8 - ALARM CONFIGURATION
Position the cursor on ALARM CONFIGURATION, press ENTER to confirm.
To enable or disable each diagnostic alarms:
- with SCROLL chose the desired item and press
- with SCROLL enable or disable the alarm signal and press ENTER to confirm.
LEFT ARROW to exit.
PRIMARY DEVICE
SELF CALIBRATION
MEASURE STATUS
FROZEN GAIN
MAX GAIN TH
PEAK VALUE
START TOTALIZER
ALARM CONFIGURATION
►
TEMPERATURE
NO ECHO FOUND
MAX GAIN
ECHO IN BILD
FLOW > 120%
►
DISABLE
ENABLE
►
DISPLAY VALUES
RESET VALUES
►
