DIGITAL WEIGHING INDICATOR
SI 4000
4
2. INTRODUCTION
2-1. Introduction
Thank you for your choice, this “SI 4000” Industrial Digital Weighing Indictor..
This “SI 4000” model is simple application usage Digital Weighing Indicator, with powerful
communication performance.
With 2ports serial port communication and High Speed A/D conversion performance will lead you
to precise weighing process.
This “SI 4000” Weighing Indicator is simple application model, and it can be used for “Truck Scale,
Platform Scale, Tank Scale.
Please review this instruction Manual and learn more about information about “SI 4000”.
Enjoy your process efficiency with “SI 4000” Weighing Indicator..
2-2. Cautions
1) Don’t drop on the ground or avoid serious external damage on item.
2) Don’t install under sunshine or heavy vibrated condition.
3) Don’t install place where high voltage or heavy electric noise condition.
4) When you connect with other devices, please turn off the power of item.
5) Avoid from water damage.
6) For the improvement of function or performance, we can change item specification without
prior notice or permission.
7) Item’s performance will be up-dated continuously base on previous version’s performance.
8) If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
9. If the operation environment is dusty, regular cleaning might be needed.
2-3. Grounding
Ground the earthing terminal to protect from being affected by intensive electrical disturbances.
As the indicator has a 3-pole plug, grounding can be taken from the plug.
2-4. Features
1) All Modules and Option Cards are isolated to maximize accuracy and performance.
2) External input terminal inside.(4pcs:Can be set by F11 mode)
3) By using “Photo-Coupler” on each module(Option, Analog board, In/Out), we improved “Impedance
problem”, “Isolation ability among inputs”, “Leading power problem”, and “Noise covering function”.
4) Data back-up function, when the sudden power off
5) Polycarbonate film panel, strong against dust and water
6) 2port Serial Interface - RS-232C (Com. Port1) is standard installed.
7) Weight Unit selection Function added. (“g”, “kg”, “t” selectable – F40)
8) Variable options(Order in advance, Refer Chapter 5. Interface)
Cautions
!
