DIGITAL WEIGHING INDICATOR
SI 4000
19
5-4. F-Function Set-up
Set-up means set the F-function and make SI 4000 weighing controller will perform more accuracy.
(Considering external / internal environmental condition)
5-4-1. Enter F-Function Set-up Mode
Method : Press
key for 4secs. Then you can enter “F-Test” mode. Under this mode, press
key and enter the “F-function” mode.
※
remarks : In case that
“
P-W
”
is displayed, you have to input the pass word to start
calibration mode.
5-4-2. F-Function Change
Under F-function mode, Whenever you press
key, the Function No. will be increased
one by one. It is increased to F-90 and return to F-01
If you move to certain function No., press F-function no. with number key and press
key.
Ex) If you want to call “F21-XX ” directly under “F-function mode”.
Press “
” and “
” key and press
key.
Then, you can call “F21-XX” directly.
5-4-3. F-Function Set Value Change
Under F-Function mode, input New set value with Number keys and press
key to save.
If you don’t press
key, the new set value is not be memorized.
Ex) If you want to change the “F01-01” to “F01-02”.
Under “F01-01” mode, press “
”
and
“
” key.
And press
key to save.
5-3-4. Exit “F-function” Mode
Under “F-function” mode, press
key, you can move back to “F-Test” mode.
Under “F-Test” mode, press
key once again, you can move back “Stand-by” mode.
