40
5 Maintenance
5
Maintenance
The maintenance inspections for the device are divided into the
following areas:
z
Functional test/inspection
z
Check to ensure the indication accuracy and the leak-tightness
of the device
z
Adjustment
z
Maintenance and repair
5.1
Functional test/inspection
The functional test is performed by the user before commenc
-
ing work.
The following elements must be tested:
z
External condition of the device
z
Function of controls
z
Battery charge status
z
Zero point
5.2
Check to ensure the indication accuracy and leak-tightness
of the device
The indication accuracy and the leak-tightness of the device must
be checked at least once a year.
SEWERIN recommends that these tests also be performed if any
irregularities occur during measuring or the measuring results
are inexplicable.
Checking the leak-tightness of the device means cheaking that
the
MiniLec 4
itself is leak-tight. This check must not be confused
with the leak test (see section 3.1.4).
Both tests are carried out using a
MiniLec 4 tester
(see sec-
tion 7.6.2).
