16
3 Operation
3.1.4.2 Execution
The device is in
measuring
mode
.
z
Press the or key for approx. two seconds to access the
User menu.
z
Use the or key to select the menu item
Start meas.
.
z
Confirm with
key.
The measurement is started.
The measured values and the
remaining measurement time
are indicated.
The end of measurement is indicated by an audible signal.
The appropriate protocol is indi
-
catedon the display for approx.
30 seconds. The measurement
is stored.
z
Confirm the displayed protocol with the key. The
Client/
Meter no.
menu appears.
z
If necessary use the or key to select the menu item
Client
no.
. Enter a Client no. (max. 6 digits).
z
If necessary use the or key to select the menu item
Meter
no.
. Enter a Meter no. (max. 8 digits).
z
Use the or key to select the menu item
Continue
. The
device will return to measuring mode.
The appropriate protocol can be called up in the User menu via
the menu item
Protocols
(see section 3.1.8).
M
150.5
mbar
9:59
M
150.4
mbar
N .: 0002
15.05.2008 13:00
o
Result WO
12:37 150.5 mbar
12:47 150.3 mbar
M
