26
3 Operation
z
Press the or
key to select a specific protocol.
z
Confirm the selection with the
key.
The
Protocols menu
appears.
z
Press the or
key to select a specific command.
z
Confirm the selection with the
key.
The command is executed. The display returns to the mea
-
suring mode.
Note:
To permit execution of the commands
,
Send
and
Send all
, it is required to align the
MiniLec 4
with the receiving instrument (see chapter 2.3).
If no receiving instrument is detected, the search
run is interrupted after two minutes. The instrument
returns to the Protocols menu.
The search run can be cancelled any time by press
-
ing the
key.
Printing protocols
The Client and Meter nos. also appear on the printed test protocol
if both were entered when the measurement was saved.
Send
Send all
Clear
Clear all
Exit
