SEW MOVITRAC LTP series, Operating Instructions Manual

Page: 37 / 80

Operating Instructions – MOVITRAC® LTP
37
8
Parameter specifications:
Parameters
8.2.2 Extended parameters
Par. Description Range Default Explanation
P2-01 Digital input function select 0 ... 22 0 Defines the function of the digital inputs.
P2-02 Preset speed 2 –P1-01 ... +P1-01 0.0 Hz Sets jog / preset speed 2
P2-03 Preset speed 3 –P1-01 ... +P1-01 0.0 Hz Sets jog / preset speed 3
P2-04 Preset speed 4 –P1-01 ... +P1-01 0.0 Hz Sets jog / preset speed 4
P2-05 Preset speed 5 –P1-01 ... +P1-01 0.0 Hz Sets jog / preset speed 5
P2-06 Preset speed 6 –P1-01 ... +P1-01 0.0 Hz Sets jog / preset speed 6
P2-07 Preset speed 7 –P1-01 ... +P1-01 0.0 Hz Sets jog / preset speed 7
P2-08 Preset speed 8 –P1-01 ... +P1-01 0.0 Hz Sets jog / preset speed 8
P2-09 Skip frequency P1-02 ... P1-01 0.0 Hz Centre point of skip frequency band set up
in conjunction with P2-10.
P2-10 Skip frequency band 0 ... P1-01 0.0 Hz
(disable) Width of skip frequency band centred on
frequency set in P2-09.
P2-11 Analog output /
Digital output 1
Function select (Digital output mode) 7 Digital output mode. Logic 1 = DC +24 V
0: Drive enabled 0: Logic 1 when drive enabled (running)
1: Drive healthy 1: Logic 1 when no fault condition exists on
drive
2: Motor at target speed 2: Logic 1 when motor speed matches set-
point speed
3: Motor speed > 0 3: Logic 1 when motor runs above zero
speed
4: Motor speed
≥
limit 4 - 6:
Digital output enabled using level set in
P2-12h and P2-12L
5: Motor torque
≥
limit
6: 2nd analog input
≥
limit
(Analog output mode) (Analog output mode)
1)
1) Analog output format refers to P2-36
7: Motor speed 7: Motor speed, 0 ... 10 V = 0 ... P-01
8: Motor torque 8: Motor torque, 0 ... 10 V = 0 ... 200 % of
motor rated torque
9: Motor power (kW) 9: Motor power, 0 ... 10 V = 0 ... 150 % of
drive rated power
10: Motor current 10: Motor current, 0 ... 10 V = 0 ... 200 % of
P1-08
P2-12(h) Digital output control high
limit Speed : 0 ... 200 %
(200 % = max speed)
Torque : 0 ... 200 %
(200 % = rated torque)
PID feedback : 0 ... 200 %
(200 % = max 2nd analog input) 100 % Digital output state set to logic 1 when
selected value in P2-11 larger than this
limit.
Limit in P2-12 relates to speed if P2-11 = 4,
to motor torque if P2-11 = 5 or to the PID
feedback value (2nd analog input) if
P2-11 = 6.
P2-12(L) Digital output control low
limit 0 … P2-12(h) 100 % Digital output state back to logic 0 when
selected value in P2-11 less than or equal
to this limit. (P2-11 = 4,5 or 6)
P2-13 User relay output function
select 0: Drive Enabled 1 If P2-15 = 0 (Normally Open), the relay
contacts are closed when the selected con-
dition is fulfilled.
If P2-15 = 1 (Normally Closed), the relay
contacts are open when the selected condi-
tion is fulfilled.
1: Drive healthy
2: Motor at target speed
3: Motor speed > 0
4: Motor speed
≥
limit
5: Motor torque
≥
limit
6: 2nd analog input
≥
limit
P6..
P60.
P600