8
Assembly and Operating Instructions – Gear Units R..7, F..7, K..7, K..9, S..7, SPIROPLAN® W
2
Target group
Safety Notes
2.3
Target group
Any mechanical work may only be performed by adequately qualified personnel. Quali-
fied personnel in the context of this documentation are persons familiar with the design,
mechanical installation, troubleshooting and servicing of the product who possess the
following qualifications:
•
Training in mechanical engineering, e.g. as a mechanic or mechatronics technician
(final examinations must have been passed).
•
They are familiar with these operating instructions.
Any electronic work may only be performed by adequately qualified electricians. Quali-
fied electricians in the context of this documentation are persons familiar with electrical
installation, startup, troubleshooting and servicing of the product who possess the
following qualifications:
•
Training in electrical engineering, e.g. as an electrician, electronics or mechatronics
technician (final examinations must have been passed).
•
They are familiar with these operating instructions.
All work in further areas of transportation, storage, operation and waste disposal must
only be carried out by persons who are trained appropriately.
All qualified personnel must wear appropriate protective clothing.
2.4
Designated use
The gear unit series R..7, F..7, K..7, K..9, S..7, SPIROPLAN
®
W is intended for use in
industrial systems.
The gear units may only be used according to the specifications in the technical docu-
mentation from SEW-EURODRIVE as well as the specifications on the nameplate. They
fulfill the applicable standards and regulations.
When installed in machines, startup (i.e. start of designated operation) is prohibited until
it is determined that the machine complies with the local laws and directives. In the in-
dividual area of application, you must especially observe the Machinery Directive
2006/42/EC as well as the EMC Directive 2004/108/EC. The EMC test specifications
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6 and EN 61000-6-2 form
the basis for this.
Use in potentially explosive atmospheres is prohibited unless specifically designated
otherwise.
2.5
Other applicable documentation
The following publications and documents have to be observed as well:
•
"DR.71 – 225, 315 AC Motors" operating instructions for gearmotors
•
Operating instructions of any attached options
•
"Gear Units" catalog or
•
"Gearmotors" catalog
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
