34
GB
9.2 After use: cleaning the grill insert
After use, and also if the appliance is not going to be used for some time,
we recommend taking out and disassembling the grill insert, and cleaning it
thoroughly.
WARNING!
If these interior components are not cleaned
regularly, there is a hygienic risk, and the fire danger
increases; in addition, it will become more and
more difficult to remove old dirt particles.
– The interior components should therefore be
cleaned regularly and each time the unit is not
going to be used for some time, but at least
once a week.
Fig. 4:
Removing the grill insert
1.
Wait for around 30 minutes until the components have cooled down to
room temperature.
2.
Pull the grill insert upwards and out of the appliance as shown
(fig. 4).
3. Separate the reflectors from the grill insert by turning them (fig. 5).
Fig. 5: Unlocking and removing the reflectors
4.
If necessary, compress the spring which forms the ‚sausage cage‘ and
remove it as shown (fig. 6).
Fig. 6:
Removing the springs
WT5005_CS6VM_EN.indd 34
21.08.2020 11:01:17
