11
CEILING MOUNT TEMPLATE
Refer to the included Installation Guide for complete instructions
Optional: Using the keyhole locations, drill
the additional holes for the support screws.
Insert and fasten two screws without
washers until approximately 1/2" remains.
Optio
na
l K
ey
ho
le S
lot
Optio
na
l K
ey
ho
le S
lot
2. Drill pilot holes
Wood Joist/Truss Mounting:
Pre-drill the four marked holes on the wall 3-inches deep with a 7/32” drill bit.
Concrete:
Pre-drill the four marked holes on the wall 3-inches deep with a 7/16” masonry drill bit. Insert a plastic
anchor into each of these holes. If necessary, lightly tap each anchor into place with a hammer.
Optional: Using the
keyhole locations,
drill the additional
holes for the
support screws.
Insert and fasten
two screws without
washers until
approximately 1/2”
remains.
Optio
na
l K
ey
ho
le S
lot
