background image

2

Prior to the installation of this product, read all 

instructions. Keep this manual for future reference.

This product is designed to mount televisions 

and any accessories weighing up to 200 lbs. to a 

properly rated ceiling structure.

CAUTION

 

DO NOT EXCEED MAXIMUM LISTED 

WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY 

DAMAGE MAY OCCUR.

Warnings: 

• Safety measures must be practiced at all times 

during the assembly of this product. Use proper 

safety equipment and tools for the assembly 

procedure to prevent personal injury.

• 

At least two qualified people should perform the 

assembly procedure. Proper installation must 

be followed as outlined in these installation 

instructions. Personal injury and/or property 

damage can result from dropping or mishandling 

the TV.

• Ensure that there are no missing or defective 

parts upon receipt. Never use defective parts. 

• This product contains small parts that could be 

a choking hazard.

• 

The ceiling you affix the Séura mount to must 

be capable of supporting five times the weight 

of the television and the mount combined. A 

professional installer or structural engineer 

should inspect or verify the requirements of 

the wall.

• Do not use this product for any purpose other 

than to mount a VESA compliant TV on a vertical 

surface as outlined in this manual.

• When mounting to metal structures or concrete 

ceilings, an alternative anchor (not included) 

should used. 

• Always inspect mounting location for electrical 

wires, water, and natural gas lines prior to 

installation. Cutting or drilling into these utility 

lines may cause serious personal injury or 

property damage.

• Do not install near sources of high heat.

• Do not install on a structure that is prone to 

vibration, movement or chance of impact.

Note: The included hardware is for mounting to 

vertical concrete surfaces or wood trusses and 

ceiling structures. If you are uncertain about the 

nature of your wall, please consult your hardware 

or installation professional for proper mounting to 

types of walls.

Safety

Compatible with Séura Outdoor TVs:

Shade Series: SHD1-55, SHD1-65, SHD1-75, SHD2-43, SHD2-55, SHD2-65, SHD2-75
Ultra Bright: STM3-55-U, STM3-65-U, STM3-86-U

WARNING: Cancer and Reproductive 
Harm: www.p65warnings.ca.gov.

Summary of Contents for LC-1





















Reviews: