20 of 38
cRIO LVDT 9312 Module
Technical Description
Issue
05
24/05/2022
3.5
U
SING
T
HE
D
RIVER
T
OGETHER
W
ITH
A
NI
R
EAL
T
IME
C
OMPACT
RIO
The procedure illustrated before (see 3.4) refers to a PCI-/PXI FPGA-Target, but all driver components are fully
compatible with a cRIO target. The only exception is the eight-slot example application which is only operable on
an eight-slot cRIO chassis.
cRIO-Chassis (with FPGA-Target):
When the cRIO chassis and FPGA target does not exist in the new application, it must be installed as shown in
chapter 3.4.1.2
: select „New
→
Targets and Devices“ device type „cRIO Realtime“ by
c
licking the “+” button.
LabVIEW now detects the connected cRIO chassis.
On detection of the chassis it must be selected and “OK” must
be checked.
LabVIEW then asks for the I/O acquisition mode. Select method „LabVIEW FPGA Interface“.
When a new chassis is added, LabVIEW automatically triggers the „Discover C
-
Series Modules“ procedure.
LabVIEW now detects newly installed cRIO modules.
The external supply is not required for module detection.
