Installation Instruction
9
PIUMA MILLENNIUM
Automatism components shift and removal
Disassemble the push arm (if present) (Fig. 10 Part A) by unscredoor the counter-sunk head screw M6 x 70 (Fig. 10 Part
B). Extract the top hexagonal stop (Fig. 10 Part C). Remove the aluminium cover (Fig. 10 Part D) by pulling it outwards.
To facilitate the fastening of the automatism, it is possible to remove the heads (Fig. 11 Part A) and move or remove the
internal components, if necessary, by operating on the nuts fastening them to the aluminium base.
WARNING:
Before loseening component lock screws to move components, measure the distance of the motor from
the head or make marks on the box for correct component positioning at the end of assembly.
Fig. 10
A
Fig. 11
B
C
D
A
A
