Technical specifications
Automatism installation preparation
The automatism is prepared to work in different accessory and periph-
eral configurations. According to the selected configuration, arrange
the cables necessary for wiring all the peripherals. Fig.1 shows an
example of complete installation including:
A. Entry Radar
B. Active safety sensor
C. Safety closing device
D. Logic selection selector
E. Opening button at exit
WARNING
If two single Piuma automatisms are used to move a two-doors entran-
ce, the two automatisms must be connected by a shielded cable with
4 0.22mm wires as indicated on page 26.
Automatism description
The PIUMA Millennium automatism
(Fig.2)
is
essentially made up of:
A. Extruded aluminium alloy fastening base
B. Extruded aluminium alloy cover
C. Aluminium end sides (Flat steel end sides
option)
D. Gear motor unit
E. SESAMO MILLENNIUM Electronic control
panel
F. Transformer
G. Encoder unit
H. Emergency battery (24V 0,8Ah)
For a two-doors entrance, two automatisms
can be ordered in a single transom box
(Piuma Doppio) with custom length (minimum
1600 mm).
Installation Instruction
5
Fig. 1
Fig. 2
PIUMA MILLENNIUM
Power supply
230V ac 50 Hz
Nominal power
60 W
Nominal motor torque
23 Nm
External device power
12Vdc – 6W
Emergency battery
24 V 0.8 Ah
Max opening angle
100°
Door maximum weight
Up to 200 Kg
Door dimensions
700÷1200 mm
Working temperature
Box inside from 0°C to+50°C
Anti-crushing
Automatic traction restriction in the presence of obstacles
Weight
8,6 kg
Service
Continuous (>500 cycles/day, with capacity of 300 cycles/hour for 2 hours)
A
E
D
C
B
230V AC
A
B
D
C
G
F
E
H
