22
Installation Instruction
PIUMA MILLENNIUM
WARNING
If no optional operation lock device is installed, make sure the KEY input is short circuited with the COM input. Otherwise
the equipment cannot be started.
WARNING
For correct automatism operation and in order to guarantee optimization of the parameters that regulate door movement,
make certain that the dip switch S8 is set correctly.
Start Up
Master - Slave Selection (Piuma Doppio Only)
Only in the case of Piuma Doppio, after having set S3=ON, it is necessary to set a master automatism and a slave automatism.
S1 ON
S2 OFF
S3 ON
setting door Master
S1 OFF
S2 OFF
S3 ON
setting door Slave
WARNING
In the Piuma Millennium Doppio, it is necessary to set a Master card and a Slave card. The two cards must NEVER be set
both as Master or both as Slave.
S1 ON
S2 OFF
S3 ON
Enter double Master door with
synchronised door motion.
S1 OFF
S2 OFF
S3 ON
Enter double Slave door with
synchronised door motion.
Synchronised/Indipendent Door Motion (Piuma Doppio Only)
S1 ON
S2 ON
S3 ON
Enter double Master door.
If indipendent it is the first to open
and the last to close.
S1 OFF
S2 ON
S3 ON
Enter double Slave door.
If indipendent it is the last to open
and the first to close.
SYNCHRONISED DOOR MOTION
(
DEFAULT
)
INDIPENDENT DOOR MOTION
For Piuma Doppio, the type of door movement must be determined: in the case of doors without central stops, the motion
will be synchronized (the opening and closing of the same occurs simultaneously). In the case of doors equipped with a
central stop, the movement will be phase-shifted: the Master door will be the first to open and the last to close.
WARNING
The setting of the dip switch S2, indicating the synchronization or phase-shift of the doors, will have to be identical for
both the Master door and the Slave door.
