Sesamo Puma Millenium, Installation Instruction

Page: 18 / 28

18
Installation Instruction
PIUMA MILLENNIUM
ON indicates mains
voltage present
ON
indicates
encoder
signal
presence
ON indicates electronic
lock power
ON indicates 12V external
peripheral power supply
Fig. 29
Factory use
only
LED Functions
Diagnostics Led
(see Error Message Table)
External peripheral
signal presence led.
ON indicates motor
power supply
Jumper Function
Jumper ON OFF (Default)
J1 24V 12V
J2 Door Weight > 100kg Door Weight <100kg
J3 Cyclic Operation Standard Operation
J4 - -
J1 : Selection of the electric lock power supply voltage
J2 : Selection of the door weight
J3 : Cyclic operation (only for tests)
J4 : Not used
To set the jumpers J1 and J2 correctly, see the following paragraphs.
Dip-Switch Function
Dip-Switch Piuma Piuma Doppio
S1 Multislave Selection Master/Slave Selection
S2 Multislave Selection Synchronised motion
S3 Number Door Selection
S4 “Low Power” Mode Selection
S5 First Input Mode Selection
S6 Battery Mode Selection
S7 Electric Lock Operation selection
S8 Selection of the type of arm
To set the Dip-Switch correctly, see the following paragraphs.