SerVision
UVG400 Installation Guide
Introduction
4
Introduction
This guide explains how to set up the hardware components of SerVision’s UVG400 security system. The UVG400
belongs to SerVision’s line of embedded Video Gateway units. These units provide state-of-the-art security
functionality, including live video streaming, video recording and playback, motion detection, sensor management,
real-time event notification, and device activation. All of these features can be accessed remotely via PC, PDA, or
cellular telephone.
The UVG400 can stream video and other security data to users via cabled Ethernet connection or wirelessly via
WiFi or cellular networks. This versatility makes it ideal for securing locations in which cabled connections are not
available: garages, stables, parking lots, construction areas, etc.
Once the UVG400 has been installed as explained in this guide, it must be configured. Configuration is performed
by connecting to the UVG400 unit using a PC that is on the same network as the unit (or connected to the unit
directly using a LAN cross cable) and opening the unit’s configuration utility in a browser. For additional
information about configuring your UVG400, please refer to the
Embedded Video Gateway System Guide
.
Client software
is used for accessing the UVG400 unit remotely in order to view video and events and control the
system in various ways. SerVision offers client software for PCs and for certain cellular telephone and PDA
models. Full instructions for the use of the client applications are available in separate manuals, which can be
downloaded at
http://www.servision.net
.