manualshive.com logo in svg

serverLink KVM over IP Module, User Manual

Share
Download
serverLink KVM over IP Module User Manual Download Page 71

KVM over IP Module

71 / 99

 

 

A freely available Dynamic DNS service (www.dyndns.org) can be used in the following 
scenario. 

 

 

 

 

 

 

Figure 5-20  Dynamic DNS Scenario

 

 

The IP-KVM is reachable via the IP address of the DSL router, which is dynamically assigned 
by the provider. Since the administrator does not know the IP address assigned by the provider, 
the IP-KVM connects to a special dynamic DNS server in regular intervals and registers its IP 
address there. The administrator may contact this server as well and pick up the same IP 
address belonging to his card. 

 

The administrator has to register an IP-KVM that is supposed to take part in the service with 
the Dynamic DNS Server and assign a certain hostname to it. He will get a nickname and a 
password in return to the registration process. This account information together with the 
hostname is needed in order to determine the IP address of the registered IP-KVM. 

 

You have to perform the following steps in order to enable Dynamic DNS: 

 

•  Make sure that the LAN interface of the IP-KVM is properly configured. 

 

•  Enter the Dynamic DNS Settings configuration dialog as shown in Figure. 

 

•  Enable Dynamic DNS and change the settings according to your needs (see below). 

 

Enable Dynamic DNS

 

 

This enables the Dynamic DNS service. This requires a configured DNS server IP address. 

 

Dynamic DNS server

 

 

This is the server name where IP-KVM registers itself in regular intervals. Currently, this 
is a fixed setting since only dyndns.org is supported for now. 

 

DNS System

 

Summary of Contents for KVM over IP Module




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands